Mark posted a full body scan of Isabelle yesterday. Here’s the turntable animation video
I asked him for a statement on the required post-processing. Here is his full answer quoted.
[…] I’m impressed with the perfomance of ReconstructMe! Can’t stop scanning.
[…] After a few scans I found myself moving away from stiff “standard poses”, to more inspired ones, like a photographer would do. Its so much fun, scanning in 3D!
[…] Some post-proces info: I’ve applied smoothing here and there in Zbrush in addidition to Standardbrush adding – substracting to enhance the wrinkels in the clothing. Then scan was made with the “human” config settings, The face comes from a different scan.
More on his blog.
Here are two more turntable animations of Isabelle
and Mark
Nice scan, and pretty model :-)
Thanks Pascal, she is wonderfull to work with. Today I did some new scans with her, to test the multiscan function. After a few scans I found myself moving away from stiff “standard poses”, to more inspired ones, like a photographer would do. Its so much fun, scanning in 3D!
Hi Mark, would you like to share these? I’d love to put them online.
Just uploaded a new scan: http://youtu.be/bpmoM_0l0ck
Also, today Isabelle scanned ME! http://youtu.be/q094DQolJd4
Concerning the Multiscan feature: It works on quickly scanned surfaces, but it does not align (skips *.ply creation) on thourougly scanned parts of objects, in my experience. Is there a way to convert the RAW files to PLY and stitch manually if autostitch fails?
Hi Mark,
what do you mean that it skips .ply creation? That should never happen. In case the volume was already converted, ReconstructMe remembers that and won’t convert it again. use
--forceto re-convert everything.You can always open post-align the .ply files in Meshlab either using pair-wise alignment or manual alignment.
Best,
Christoph
What would i need to be able to scan a clay sculpture i just about completed to get a water tight mesh to use on a CNC machine to enlarge original sculpture that is about 27″ tall to 7 feet tall in EPS foam (Styrofoam)
Any help on or Leeds on what hardware and software i would need to accomplish this. and what kind of results i could expect.
Thank you
Sincerely
Jamie Arias
Hi Jamie, try ReconstructMe & Kinect with “Human_highres” config settings! I’m using a turntable but you can off course walk around the statue. Good luck!
nice scan mark
Christoph,
I am having trouble getting good results with a full body scan.
Reconstructme seems to complete it’s scan before I have the whole figure scanned.
Can you please post the following:
Reconstructme Version you are using
Sensor Type
Settings for Volume / Handling / Surface / Device
Distance from sensor to model
Any movement you make with the sensor while the model is rotating on a turntable (if you used a turntable).
The portrait / selfie mode is fantastic and works every time. It’s just the full body scan that is giving me trouble.
Thanks !