Use of Reconstruct me

Digitize Your World Forums Everything Else Use of Reconstruct me

This topic contains 2 replies, has 3 voices, and was last updated by  terrybarr 11 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #11025

    Ahmed

    Hello,
    I was intending to buy a 3d scanner. I would like to scan and reproduce artwork especially artwork for furniture and also stone and marble 3d artwork. I came across your software and I wounder whether I buy your software with MS Kinect sensor, does this system will give me the same result of the 3d scanner? will the kninect be accurate in scanning deep details of 3d artwork in order to produce it with a cnc router machine? please advice based on your experience or your client experience.

    #11037

    Christoph Heindl
    Keymaster

    Hi Ahmed,

    you can use our software before buying. That way you can evaluate its features and see if it fits your needs. The software will at maximum give you the accuracy of the sensor used. If you go for a Kinect, you should expect a resulting accuracy of 5-10mm, depending on what you scan, how you move the scanner and other factors. See here

    http://reconstructme.net/qa_faqs/how-can-i-improve-the-quality-of-my-scanning-results/

    Best,
    Christoph

    #40668

    terrybarr
    Participant

    I don’t think this idea will also work on most type of furniture, like the outdoor furniture set that I have, example is this type http://www.javateakoutdoorfurniture.com/products/deep-seating-2/.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.